Welcome to the official website of Changsha Xiangneng Oil Filter Machine Manufacturing Co., Ltd.!

中文版   |   ENGLISH


Phone: 0731-89853899

中文版   |   ENGLISH

Check category

Xiangneng Vacuum Oil Filter Operation Guide

2019-09-26 10:00
Xiangneng vacuum oil filter operation guide (can not replace the instruction manual)
Power on: 1. Check that all electrical switches and oil filter valve positions are closed and returned.
2. Check if the power phase sequence is correct (the phase sequence indicator is correct). The neutral line and the live line must be connected to the same leakage protector.
3. After everything is displayed, start the vacuum pump. When the vacuum reaches about -0.06, the oil inlet valve and the oil outlet valve are simultaneously opened. When the glass mirror on the flash tank shows oil injection, turn on the heater, then turn the pump button to automatic start to run.
Shutdown: 1. The heater must be turned off before shutdown to prevent dry burning. Stop the vacuum pump again.
2. The oil pump switch is converted into the manual position, the oil pump is started, the residual oil in the oil filter is drained, and then the oil inlet valve and the oil outlet valve are closed, and the power is cut off.
Note: 1. If the oil filter is not circulating in one container during operation, please note that the filter medium is drained and the heater is burned out.
2. During operation, when the oil temperature rises, the tubing will soften. In this case, tighten the hoop on the inlet and outlet pipes again to avoid leaking oil.
3. If the medium to be filtered is heavier, open the foam controller when filtering oil to lower the oil level to prevent oil from overflowing.
4. It is forbidden to operate the vacuum pump without oil or oil. The vacuum pump oil level must be maintained at the liquid level of the vacuum pump.
Special warning: Please filter the heavily polluted oil before filtering, so as not to block the filter and damage the pump.
Xiangneng Vacuum Oil Filter Operation Guide



Address: 3/F, Building 18, Tianxin Pioneer Park, Xinlu Village, Dato Town, Tianxin District, Changsha City

Business Consulting:0731-89853899   

Service line: 0731-89853099  
13607489711 Miss Sun 
Technical consulting:
13873135118  Mr. Huang




Welcome to our official public account




Username used for comment:

Changsha Xiangneng Oil Filter Machine Manufacturing Co., Ltd.   湘ICP备19018012号   by:www.300.cnchangsha