Welcome to the official website of Changsha Xiangneng Oil Filter Machine Manufacturing Co., Ltd.!

中文版   |   ENGLISH

logo

Phone: 0731-89853899

中文版   |   ENGLISH

Check category

What is the third-level filtration of lubricating oil?

2019-09-26 09:46
Lubricating oil filtration means:
 
Primary filter, secondary filter, tertiary filter (also called fine filter)
 
Primary filter: It mainly filters out the coarse particles in the oil to protect the oil pump.
 
Secondary filter: further treatment of impurities in the oil,
 
Three-stage filter: Filter fine particles of impurities in the oil.
 
The filtration method is an adsorption method, which is purely physical filtration, and does not cause damage to the additives in the oil.
 
This treated oil cleanliness can reach NAS (1638) level 5 ~ 9
 
Operation method:
 
(1) Place the machine on a relatively flat ground or in a car trunk, and carefully check whether the whole machine is loose or not. Pay special attention to the connection between the motor and the oil pump must be tight and concentric.
 
(2) Connect the power supply correctly and start the oil pump to check whether the rotation direction is correct, otherwise change the power phase sequence.
 
(3) Connect the oil pipe into and out of the oil pipe and fasten it to remind the user that the oil pipe and the oil outlet must be tightened. Otherwise, as the pressure increases, the oil pipe will be washed away, adding unnecessary trouble.
 
(4) After fixing the oil inlet and outlet, the motor button is activated, and the oil pump starts to work normally. The oil that has been filtered through the third stage is the purified oil.
 
(5) When one barrel (box) of oil is pumped out and needs to pump another barrel (box) of oil, it needs to move quickly to avoid the oil pump idling for a long time. If it is too late, stop it and wait until the inlet pipe is connected and restart.
 
Maintenance:
 
(1) The machine mainly adopts mechanical filtration method, and reduces the density of the filter network step by step to achieve the purpose of improving the filtration precision. It can be seen that during the working process of the equipment, the first-stage filtration is easily blocked by impurities, and The incoming oil is less than the oil.
 
Treatment method: Remove the first stage filter upper cover, take out the filter net, and clean it with the same type of cleaning oil.
 
(2) If the head is too high during the refueling process, the motor temperature will rise rapidly and the oil pump noise will increase.
 
Treatment method: 1. Work according to the specified head; 2. Intermittent work.
 
(3) The oil pump noise is abnormally increased:
 
Treatment method: 1. Check whether the oil pump connecting shaft is concentric; 2. Whether the fastening nail is loose or dropped. All of the above phenomena need to be restored to eliminate.
 
(4) It is strictly forbidden to avoid the motor.
 
(5) The continuous operation of the whole machine shall not exceed 150 hours. If it reaches 150 hours, the whole machine will rest for two hours.
/
/
/
What is the third-level filtration of lubricating oil?

CONTACT INFORMATION

 

Address: 3/F, Building 18, Tianxin Pioneer Park, Xinlu Village, Dato Town, Tianxin District, Changsha City

Business Consulting:0731-89853899   

Service line: 0731-89853099  
Contact:
13607489711 Miss Sun 
Technical consulting:
13873135118  Mr. Huang

hnxiangneng@163.com

OFFICIAL ACCOUNTS

 

Welcome to our official public account

公众号二维码

ONLINE MESSAGE

 

Username used for comment:
客户留言
Description:
验证码

Changsha Xiangneng Oil Filter Machine Manufacturing Co., Ltd.   湘ICP备19018012号   by:www.300.cnchangsha